Thermal Requirements
The process to comply with building regulations requires 3D Thermal modelling using a specific software system. The following slides show the modelling process of a Built up System, with the various components labelled.The whole process from start to finish takes approximately between 4 & 6 hrs depending on the complexity of the detail. All details are thermally modelled and are registered onto our database.
Screen shot 1 - 19/1000 Liner dimensioned and assigned a thermal property
Screenshot 2 - Eurobar Extra 135mm positioned on the liner
Screenshot 3 - 32/1000 Top sheet supported by the Eurobar Extra
Screenshot 4 - The insulation is added to the model
Screenshot 5 - The calculation produces a visual and numerical output
Screenshot 6 - When the model is cut to show the Eurobar Extra, the effect on the heat flow is visible
Screenshot 7 - The hot and cold spots caused by the thermal break can be seen on the liner and top sheet.
