Reference Documents
Euroclad Reference Documents
Euroclad Wind Loading - Part 1
Euroclad Wind Loading - Part 2
Euroclad Non-Fragililty Document
Understanding Spacer Bar Systems - by Jim Patterson (Technical Manager)
Euroclad Introduction to 3D Modelling Slide Show - by Peter Willard (Thermal Engineer)
Introduction to iSBEM Slide Show - by Mark Jones (Technical Manager)
Euroclad Facades Reference Documents
Fire Test results from Mitsubishi for the ALPOLIC/fr material- by BRE
LINEAR 1 BRE Test Data - BRE Weathertightness Test Report [September 06]
LINEAR 1 BRE Test Data - BRE Impact Test Report [September 06]
Facade System Fixings Guide [July 07]
Building Regs, Part B - Fire Break Information
Corus Reference Documents
Acoustic Performance of pre-finished steel cladding systems
This guide has been prepared to give advice to architects, designers and other construction professionals on the wide rage of acoustic solutions available when using a pre-finished steel building envelope...
Integrated lighting solutions for low energy buildings
This Colorcoat® technical paper uses full-building energy modelling to assessthe benefits provided by rooflights in large commercial and industrial buildings...
Structural Performance of built-up roofing and cladding systems - RIBA Approved
Together with the SCI, Corus have evaluatedindividual profiles from four cladding systemsuppliers and their associated componentsfor use within built-up cladding systems toconfirm their strength and stability to meetthe structural requirements of the buildingregulations in the UK.
End of life options for pre-finished steel buildings - RIBA Approved
This report gives advice on the disposal of various steel-based cladding systems,including a snapshot overview of legislation, together with typical disposalrates and costs. Options for the different systems are reviewed in order to assistwith the problems faced by demolition contractors and building owners.
Creating an air-tight building envelope - RIBA Approved
Creating an air-tight building envelope.
MCRMA Technical Papers
No1 Recommended Good Practice for Daylighting in Metal Clad
Buildings
No2 Curved Sheeting Manual
No3 Secret Fix Roofing Design Guide
No5 Metal Wall Cladding Design Guide
No6 Profiled Metal Roofing Design Guide
No7 Fire Design of Steel-Clad External Walls for Building
No8 Acoustic Design Guide for Metal Roof and Wall Cladding
No11 Metal Fabrications: Design, Detailing And Installation Guide
No12 Fasteners for Metal Roof & Wall Cladding: Design,Detailing & Installation Guide
No14 Guidance for the Design of Metal Roofing & Cladding to Document L2:2001
No16 Guidance for the Effective Sealing of End Lap Details in Metal Roofing
No17 Design guide for metal roofing & cladding to comply with UK Building Regs (2006)
No18 Conventions for Calculating U-Values, f-Values and Ψ-Values
SFS Intec Techical Document
Stainless Steel Fixings- by SFS Intec
Rockwool Technical Slideshow
